| Traditionally, timber floors frequently need pre-levelling or
sanding. Sheets of plyboard are large and dusty and have to be
carefully fitted, nailed, skimmed and sanded to produce a really
good sub-floor. On solid floors, screeds are messy, smelly, often
require primers and need rubbing down, when they eventually set
and dry. Both methods need skill and practise to achieve good results.
Both always create dust and mess.
In contrast, Jumpax panels are completely dust-free, very smooth,
self adhesive and are clean and easy to handle and install. Pre
levelling is seldom necessary, there is no smell and no glue,
nails, primers or messy mixing and rubbing down are needed. Only
the joints, occasionally, require any sanding at all. Dust and
mess are minimal.
|
