Floorfixx comfort 10mm:
120 cm x 60 cm (2.88 m2)

 

Floorfixx comfort is a system floor that, with the help of the sandwich system and interactive adhesive, quickly and easily creates a new, insulating and even underlay that can bear load immediately. It is suitable for heavy commercial use and in combination with underfloor heating. 

Floorfixx should always be installed over a polythene moisture vapor barrier, minimum 160-micron thickness.

End Use Classification: (EN ISO 10874:2009)
Class 34, Heavy use areas considered for commercial use.

  • Floorfixx comfort is 10 mm in thickness

  • Suitable for the renovation of poor basic floors

  • For use with linoleum, cushion vinyl, LVT, click LVT, carpet, carpet tiles and engineered wood with a minimum thickness of 2mm (when used with engineered wood, an appropriate adhesive must be applied)

  • No waiting or drying time and it can bear load immediately

  • Levels out unevenness and provides maximum stability

  • Insulates against impact noise and meets the 20 dB standard.

  • Developed for use in projects where higher quality standards are required due to heavy traffic

  • Due to the low thermal resistance, suitable in combination with underfloor heating and cooling

Technical Information
DOWNLOAD – Datasheet Floorfixx Comfort 10mm
DOWNLOAD – Brochure Floorfixx

Installation Instruction & Advise

DOWNLOAD – Installation Instruction
VIEW VIDEO – Installation video Floorfixx Comfort

Additional Products:

  • YouTube
  • Instagram
  • Facebook
  • Twitter
  • LinkedIn

Easylay Systems Limited

Cliff Vale Place

Stoke-on-Trent

ST4-7BB, UK

 

Tel: 0344 357 35 35 /

07802 333166

email: info@easylaysystems.co.uk

 

©  Easylay Systems Ltd, Registered Number 11472708. Website design by EasyCorp UK Ltd