top of page
Floorfixx-optimum---sfeerfoto-01.jpg

Floorfixx optimum 8 mm:
82.5 cm x 56.5 cm (2.80 m2)

​

 

Floorfixx-Optimum.png

Floorfixx optimum is a system with a unique self-adhesive layer: TRADTITIONAL GLUE IS NO LONGER REQUIRED!

Additionally, with the help of the handy lap joint, it easily creates a new, insulating and immediately usable underlay. Floorfixx optimum is suitable for residential and commercial applications.

​

Floorfixx should always be installed over a polythene moisture vapor barrier, minimum 160-micron thickness. 

For full installation details, see installation instructions and video below.

62107-Floorfixx-Optimum-8-mm+adhesive-layer-mvb.jpg
Verpakking-Floorfixx-optimum-e1578398807740.jpg

  • Floorfixx optimum is 8 mm in thickness

  • NO USE OF TRADITIONAL GLUE

  • Suitable for the renovation of poor basic floors

  • For use with LVT dry-back with a minimum thickness
    of 2.5 mm 

  • No waiting or drying time and it can bear load immediately

  • Levels out unevenness and provides maximum stability

  • Insulates against impact noise up to 20 dB 

  • 1.23 togs

  • Suitable for both domestic and commercial installations

Additional Products

69780-Vocht-dampscherm.jpg
Seam Tape.jpg
62094-floorfixx-kantstroken.jpg
Floorfixx-optimum-usps-eng.jpg

Technical Information

Technical Data Sheet Floorfixx optimum 8 mm
Brochure Floorfixx

Certificates

Fire certificate – BFL-Floorfixx-Optimum-8mm
CS-TUV-Floorfixx optimum-8mm

Installation Instruction and Advice

Installation Instruction Floorfixx Optimum 8 mm
Installation video
​
bottom of page